I INTRODUCTION TO THE PRODUCT LIABILITY FRAMEWORK
i The Product Liability Act
In Austria, a statutory liability regime that governs product liability is the Product Liability Act,2 which implemented European Directive 85/374/EEC on Liability for Defective Products into national law. In line with the European Directive, the Product Liability Act provides for a strict (i.e., no-fault) liability scheme. Liability for damages under the Product Liability Act can neither be excluded nor limited in advance.
Under the Product Liability Act, primary liability for damage caused by a defective product is placed on the entrepreneur who either manufactured the product (the producer), or imported the product into and put it into circulation in the European Economic Area (the importer).
As per the definition provided in the Product Liability Act, the producer is the person who has manufactured the finished product, a raw material or component part. Further, any person who presents itself as the producer by putting its name, trademark or other distinguishing feature on the product is regarded as the producer.
Where the producer or, in the event of products imported into the European Economic Area, the importer cannot be identified, any supplier who has put the product into circulation is liable, unless it informs the injured party within a reasonable period of the identity of the producer or the importer or the person who supplied it with the product (the preceding supplier).
The liability regime of the Product Liability Act covers liability for death, injury to body or health, and for damage to items of property resulting from the defect of a product. Damage to the defective product itself is not covered. Further, damage to an item of property is only compensable if it was not suffered by an entrepreneur who used the item of property predominantly in its business. Thus damage to items of property is basically only to be compensated to the extent that the damage was suffered by a consumer. In any case, there is a deductible amount of €500 for damage to items of property, meaning that only the part exceeding €500 is compensable. There are, however, no caps on liability.
The Product Liability Act contains (in Section 5(1)) a definition of the term 'product defect'. A product is deemed defective if it does not provide the safety that, taking all circumstances into account, could reasonably be expected, in particular with respect to:
- the presentation of the product;
- the use to which it can reasonably be expected that the product will be put; and
- the time the product was put into circulation.
However, a product cannot be considered defective for the sole reason that an improved product is subsequently put into circulation.
According to case law of the Austrian Supreme Court, for the assessment of whether a product is to be deemed defective an objective standard is to be applied based on the safety expectations of an average product user. Expectations in the safety of a product are in general only justified if the product user also meets its own individual responsibility, meaning that for unforeseeable or downright absurd uses product liability usually is not triggered. However, a certain actual, even if improper, use may have to be equitably expected; for instance, if a product is intended for use by children (such as toys or playground equipment).3
'Presentation' of a product is any activity by which a person subject to liability introduces the product to the public or the individual user, including advertisement, product descriptions, directions for use and instruction sheets.4
In general, the producer has the duty to instruct users on how to safely use the product and to warn of hazards involved in the use of the product and, under some circumstances, even to warn against possible improper use. However, these duties also depend on the need for protection of (possible) users of the product. Where a product might reach the hands of persons who are not familiar with the risks involved in the use of a product, or if a product is addressed to different profiles of users, the content and extent of the instructions must be aimed at the least informed and thus most endangered group of (possible) users.5
Whether a product is defective is to be assessed according to the time the individual product was put into circulation. A product is deemed to have been put into circulation once the entrepreneur has transferred it to another person into the latter's power of disposition or for the latter's use. In the case of a series of products, the point in time at which the individual product causing the damage was put into circulation is decisive.
The Austrian Supreme Court, in a case concerning the explosion of a glass bottle of carbonised mineral water causing personal injury, held that the producer of serial products must pay due regard to experience gained after the series was first launched on the market and to take these experiences into account in the further production, such as by modifying the construction, changing the production process or improving instructions to the product users.6
ii Other bases of liability
Apart from the Product Liability Act, liability for a defective product notably may arise out of general tort law, contract law and from the concept of 'contract with protective effect for third parties'. Liability under both general tort law and contract law as well as under this concept is fault-based.
The producer is usually a legal entity. Liability based on general tort law would require that either the producer's statutory bodies or other persons in a leading or supervisory position are at fault.7 For the conduct of other persons whom the producer employs or engages, the producer is only liable towards third persons within very narrow limits, namely if those persons are habitually unable or unfit for the assigned work.
Under contract law the counterparty is responsible for damage caused by a fault of its employees or any other persons used to fulfil its duties as if it acted itself and there is a presumption of fault in the event of non-fulfilment of a contractual obligation, in which case the burden of proof shifts to the defendant to prove the absence of fault.
Since it is characteristic for many product liability cases that no contract exists between the person suffering damage and the producer, relying on liability under contract law might often not be possible.
However, according to doctrine and case law developed prior to the introduction of the Product Liability Act in 1988, the contract between the producer and the first purchaser of the product unfolds protective effects through a chain of contracts towards the end customer with the consequence that the end customer (as well as persons deemed to belong to its sphere, such as family members or employees) may seek redress against the producer as if they were in a contractual relationship. Thus, the producer is responsible for damage caused by fault of its employees or any other persons used to fulfil its duties as if it acted itself and the end customer benefits from the reversal of the burden of proof (i.e., the producer has to prove absence of fault).
Since the introduction of the Product Liability Act, the concept of contract with protective effect for third parties has practical relevance mainly in cases where damage is not compensable under the Product Liability Act (such as, in particular, damage to property suffered by entrepreneurs) or where claims under the Product Liability Act have already become time-barred.
Liability could also arise out of the violation of a 'protective law'. For instance, the Product Safety Act is deemed as a 'protective law' by scholars.8
II REGULATORY OVERSIGHT
The European Directive 2001/95/EC on General Product Safety was implemented into Austrian law by enacting the Product Safety Act,9 which serves as the general source of law for product safety.
The Product Safety Act regulates safety requirements to be met by products, obligations of persons putting products into circulation and measures to be taken by government authorities with the aim of protecting human life and health from danger by hazardous products. Legislation governing product safety on the one hand and product liability on the other have a complementary function: the first instrument shall ensure that only safe products are put into circulation (preventive function); the second instrument establishes the rules under which personal injury and damage to property caused by a defective product are compensated (compensation function).10
In addition to the Product Safety Act, there exists regulatory legislation for specific products, such as the Pharmaceutical Products Act, the Medical Devices Act, the Food Safety and Consumer Protection Act and the Chemicals Act. Product safety and product monitoring requirements under these laws are generally stricter than under the Product Safety Act. However, as looking into these various regulations would go beyond the scope of this chapter, in the following only the Product Safety Act is addressed.
Under the Product Safety Act, the competent authorities are the Federal Ministry for Social Security, Generations and Consumer Protection and the provincial governors.
If producers, importers and suppliers know or should know from information available to them within the scope of their business activities that a product put on the market by them poses a danger to consumers that is incompatible with the safety requirements of the Product Safety Act,11 they must notify one of the competent authorities without delay. This also applies for measures, particularly product recalls, taken by producers, importers and suppliers. Failure to meet these notification obligations constitutes an administrative offence for which fines of up to €3,000 can be imposed.
Pursuant to the Product Safety Act, producers and importers have a duty to monitor products after putting them on the market, by taking measures that enable them to recognise dangers arising from the products and to take appropriate measures to avert such dangers. Such measures may, if necessary, include withdrawing the products from the market, giving reasonable and effective warnings to consumers and, if need be, recalling the products. Suppliers are required to contribute to monitoring the safety of the marketed products, such as by passing on indications of dangers that may be posed by a product and by cooperating with measures by the producers and competent authorities to avert danger.
If the producer or importer fails to take (appropriate) measures, the Federal Ministry for Social Security, Generations and Consumer Protection can take appropriate measures, including the ordering of a product recall. Contravention of these measures constitutes an administrative offence for which fines of up to €25,000 can be imposed.
Further, in this context, based on general civil law principles producers (and as the case may be also importers and suppliers) have a product monitoring duty after the product was put on the market, entailing the duty to avert dangers thus discovered by taking appropriate measures. A violation of the monitoring duty may thus give rise to civil liability if persons suffer damage because of the violation.
The nature and level of risks associated with a detected danger are to be taken into account when assessing which measures are appropriate in a given case to avert danger (principle of proportionality).
Further, if deemed a 'protective law', violations of the Product Safety Act or measures ordered by competent authorities thereunder could directly give rise to civil liability.
III CAUSES OF ACTION
Causes of actions for product liability claims in general have their basis in civil law, such as the Product Liability Act, general tort law, contract law and the concept of contract with protective effect for third parties described above. Further, a product liability claim may also be based on a violation of a 'protective law'.
The placing of a defective product on the market or violations of product safety requirements may also constitute a criminal offence under the Austrian Criminal Code, if for instance this causes bodily injury or death of a person, (substantial) environmental damage, or danger to life and health to a larger number of persons, or danger to another's property to significant extent. Apart from the responsible individual or individuals in Austria, legal entities can also be liable for criminal offences under certain conditions (as set out in the Austrian Corporate Criminal Liability Act).
Damaged persons may join criminal proceedings as private parties, which gives them the advantage to gain access to the criminal file (although access to certain documents may be restricted) and use the documents in (subsequent) civil proceedings. In rare cases, damages are awarded by the criminal court in the course of criminal proceedings. Also, in a civil proceeding, damages might be awarded more easily and swiftly if the claim can be based on a criminal conviction.
Product liability claims are determined in civil court proceedings before state courts by professional judges. Austria does not have jury trials in civil proceedings.
Provided there is an arbitration agreement between the parties involved, product liability (related) claims may also be determined in arbitration proceedings. Under Austrian arbitration law, arbitration agreements between an entrepreneur and a consumer can only be validly concluded for disputes that have already arisen. Consumers normally assert product liability claims in civil proceedings before state courts.
ii Burden of proof
If the claim is based on the Product Liability Act the plaintiff has to prove the damage, the defect and the causal relationship between the defect and the damage. As liability under the Product Liability Act is based on strict liability, the issue of fault is of no relevance.
If the defendant raises the defence that it has not put the product into circulation or not acted as entrepreneur, the burden of proof for that rests with it. Further, if the defendant relies on the defence that the defect that caused the damage did not exist at the time it put the product into circulation, it must show that with regard to all circumstances this is plausible (prima facie evidence).
If the claim is based on liability in tort, the plaintiff has to prove the damage, causation, unlawfulness, that the conduct causing the damage was unlawful and that the conduct causing the damage was at least negligent. The same holds if the claim is based on breach of contract or on contract with protective effect for third parties, with the exception that the defendant has to prove the absence of fault (negligence or intent).
In civil proceedings the general standard of proof is 'highly probable'.
For causation the conditio sine qua non test is applied, by asking the hypothetical question of whether the damage would have occurred irrespective of the conduct (or, respectively, the product defect) at issue. If this were the case, the conduct (or, respectively, the product defect) was not causal. However, doctrine and case law in addition apply the theory of adequate causation, meaning that damage that is the result of a totally atypical and extraordinary chain of circumstances of cause and effect are excluded from liability.
However, prima facie evidence may serve to the benefit of the plaintiff. If facts are established that according to general experience allow conclusions on a certain course of events, such as the existence of a product defect and the causal relationship between defect and damage, the judge may regard this as proven, unless the defendant can show that the damage may have occurred owing to an atypical course of events.12
Under the Product Liability Act, liability can be excluded by proving:
- that the defect can be attributed to a specific mandatory legal provision or official instruction with which the product had to comply;
- that the state of scientific and technical knowledge at the time the product was put into circulation by the person against whom an action is brought was not such as to enable the existence of the defect to be discovered (state-of-the-art defence); or
- that – if the person against whom an action is brought has produced merely a raw material or a component part – the defect was caused by the design of the product in which the raw material or component part was fitted, or by the instructions given by the producer of the product.
Further defences available to the defendant are that it did not put the product into circulation or did not act as entrepreneur, or that the defect that caused the damage did not exist at the time it put the product into circulation.
Outside the Product Liability Act, the defendant can invoke any defences that may serve to disprove the allegations of the plaintiff and fault.
A further defence both under and outside the Product Liability Act is contributory fault by the damaged party or a person for whose conduct the damaged party is responsible, which – if successful – may lead to a reduction of the damage the defendant has to compensate.
Further, the defendant may plead the statute of limitation.
There are relative and absolute statutes of limitations. The relative statute of limitations is three years and begins to run from the time the damaged party became aware (or at least could reasonably have become aware) of the damage and the person causing the damage. The absolute limitation period under the Product Liability Act is 10 years, starting from the time the party liable for compensation put the product into circulation. For damage claims outside the Product Liability Act the absolute statute of limitation is 30 years, starting from the time the damage occurred.
iv Personal jurisdiction
Austrian jurisdiction for product liability(-related) claims is an issue if the defendant does not have its seat in Austria, or (as is the case in most product liability cases) there is no contractual relationship between the damaged party and the defendant from which Austrian jurisdiction (e.g., because of a jurisdiction clause in favour of Austrian courts) derives.
If the defendant has its seat outside the European Union13 or not in a state party to the Lugano Convention14 (i.e., in a third state) the question of Austrian (international) jurisdiction is to be determined on basis of the Austrian Jurisdiction Law. Pursuant to Section 92a of the Law, Austrian jurisdiction for damage claims is given if the act causing the damage occurred in Austria. According to the Austrian Supreme Court, within the meaning of this provision, if the place where the act causing the damage and the place where the damage occurred are not identical, solely the place where the act causing the damage occurred is of relevance.15 In product liability cases this is basically the place where the defective product was manufactured. This is without prejudice to any liability of the importer of the product.
Notwithstanding the above, jurisdiction for claims against a producer based in a third state might be given in the case of a 'joinder of parties', for instance, if the producer is sued together with the importer who has its seat in Austria. A precondition for the establishment of a place of jurisdiction based on 'joinder of parties' is that the parties in the joinder are joined parties within the meaning of Section 11 of the Austrian Code of Civil Procedure, meaning that they are linked by equal legal or factual grounds, or that they are jointly and severally liable. In such a case the applicable law may also have to be looked into. According to Regulation (EC) No. 864/2007 of the European Parliament and of the Council of 11 July 2007 on the law applicable to non-contractual obligations (Rome II), the law applicable to a non-contractual obligation arising out of damage caused by a product shall be:
- the law of the country in which the person sustaining the damage had its habitual residence when the damage occurred, if the product was marketed in that country; or, failing that
- the law of the country in which the product was acquired, if the product was marketed in that country; or, failing that
- the law of the country in which the damage occurred, if the product was marketed in that country.
However, the law applicable shall be the law of the country in which the person claimed to be liable is habitually resident if it could not reasonably foresee the marketing of the product, or a product of the same type, in the country the law of which is applicable under (a), (b) or (c).
As regards claims against a defendant domiciled in a Member State of the European Union, the provision that a person domiciled in a Member State may be sued, in another Member State, in matters relating to tort, delict or quasi-delict 'in the courts for the place where the harmful event occurred or may occur' is of main relevance in product liability cases lacking a contractual relationship between the damaged party and the defendant. Regulation (EU) No. 1215/2012 of 12 December 2012 on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters (recast) contains this provision in Article 7(2), its predecessor, Council Regulation (EC) No. 44/2001 of 22 December 2000 on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters in Article 5(3). Likewise, the Lugano Convention (in Article 5(3)) refers to the courts of the place where the harmful event occurred or may occur.
According to the interpretation of the European Court of Justice (ECJ), in a case where the place of occurrence of the event that may give rise to liability in tort, delict or quasi-delict and the place where that event results in damage are not identical, the expression 'place where the harmful event occurred' must be understood as being intended to cover both the place where the damage occurred and the place of the event giving rise to it, so that the defendant may be sued, at the option of the plaintiff, in the courts for either place.16
The Austrian Supreme Court, in a decision of 28 November 2012,17 made a request for a preliminary ruling to the ECJ regarding the determination of the 'place of the event giving rise to the damage' in relation to product liability, by posing the question of whether this is the place where:
- the producer is established;
- the product was put into circulation; or
- the product was acquired by the end user.
The case underlying this request involved a dispute between a bicycle producer based in Germany and an Austrian plaintiff (a consumer) who had bought the bicycle from an Austrian-based company. While riding this bicycle in Germany the plaintiff suffered a fall and was injured. He subsequently sued the German producer for damages under the Product Liability Act before a court in Austria. According to the plaintiff, his fall from the bicycle was caused by the fact that the fork ends had detached themselves from the wheel fork owing to a manufacturing defect. For the purpose of establishing jurisdiction of the Austrian court, the plaintiff relied on Article 5(3) of Regulation No. 44/2001, claiming that the place of the event giving rise to the damage would be located in Austria as the bicycle was bought there, in the sense that the product was made available to the end user by way of commercial distribution.
In its judgment of 16 January 2014, the ECJ ruled upon the request by the Austrian Supreme Court that Article 5(3) of Regulation No. 44/2001 must be interpreted as meaning that, where a producer faces a claim of liability for a defective product, the place of the event giving rise to the damage is the place where the product in question was manufactured.18 Given that Article 7(2) of Regulation No. 1215/2012 is identical to Article 5(3) of Regulation No. 44/2001, it seems safe to say that the same interpretation applies. This also holds for Article 5(3) of the Lugano Convention.
v Expert witnesses
The judge can appoint experts at its discretion to assist in establishing the facts of the case. In product liability cases, it is usual that the judge appoints an expert. The parties may propose experts and reject an expert on the grounds of bias; however, the final decision rests with the judge.
The parties may present private expert opinions but courts regard a private expert opinion only as a private document attesting to the author's opinion. A private expert opinion might serve as an instrument to question or to raise doubt as to the court-appointed expert's opinion.
Austrian law does not provide for (pretrial) discovery proceedings.
In Austrian civil proceedings, it is each party's responsibility to produce the evidence necessary to support its case. There are only very limited conditions under which a party may be obliged to disclose certain evidence upon the other party's request. These conditions are specified in the Austrian Code of Civil Procedure according to which documents are subject to disclosure if:
- the opponent itself relied on the document in the course of the proceedings;
- the opponent is obliged to hand the document over by a substantive law; or
- the document is qualified as a joint deed between the parties.
Joint deeds are documents created in the interest of the party requesting disclosure, documents that contain information regarding reciprocal rights and obligations between the parties, or any documents that are in fact written negotiations between the parties.
The party requesting disclosure has to clearly specify the evidence (i.e., the document or documents) it wishes to see; requests to produce 'all relevant' documents are prohibited. If the above criteria are met, the court can order the opposing party to produce the requested documents. However, a court order to the opposing party to produce documents is unenforceable. Failure to comply with the order may only be sanctioned inasmuch as the court can take this behaviour into account in its evaluation of the entire case.
Witnesses have the duty to appear before the court and to answer truthfully. Parties (these include a company's statutory representatives, such as the CEO) are generally treated as witnesses but they are under no duty to appear before the court or to give testimony. Further, Austrian law provides for grounds of refusal by parties or witnesses to answer questions during testimony in specific circumstances (e.g., confidentiality, business or trade secrets, examination exposes the party or witness to the risk of criminal prosecution).
The Product Liability Act provides for joint and several liability where two or more persons are liable for the damage caused by a defective product. As explained in Section I, this can be the producer of the finished product, a raw material or component part, or the person who presents itself as producer, the importer, or any supplier who did not (in a timely fashion) make the required naming for exempting itself from liability. Thus, if there is more than one person liable under the Product Liability Act the person who has suffered losses can choose whether it seeks redress against one, or all, of them. If a person liable for compensation under the Product Liability Act has paid damages, though neither the person itself nor one of its employees has caused the defect, it is entitled to claim full reimbursement from the producer of the defective finished product, raw material, or component part. If several parties are liable for reimbursement, then the liability towards the person compensating the damage is again joint and several. If several parties liable under the Product Liability Act have contributed to the defect, the extent of the claim for reimbursement of the person that has compensated the damage against the other parties depends on the circumstances, in particular on the extent to which one or the other party is responsible for the damage or to which the damage was caused by bringing about a product defect.
Outside the Product Liability Act, joint and several liability may, inter alia, arise if two or more persons unlawfully and negligently contributed to the damage but the proportion to which each contributed cannot be determined.
Austrian law does not provide for market share liability.
The Product Liability Act does not contain a provision regarding successor liability for companies that have acquired the product manufacturer or other persons in the distribution chain. Thus, the general rules apply.
Section 1409 of the Austrian Civil Code contains a mandatory provision that provides for the statutory assumption of liabilities by the acquirer of a business or substantial part of assets for debts pertaining to the business or assets of which the acquirer knew or should have known at the time of the transfer. The acquirer becomes jointly liable with the seller for such debts; however, the acquirer's liability is limited to the market value of the acquired assets.
Pursuant to Section 38 of the Austrian Commercial Code, a person who acquires (by way of singular succession) and continues a business assumes all business-related relationships of the seller, including all connected rights and liabilities, as of the date of the transfer of the business. The seller, however, remains liable for these liabilities only as far as they become due during a period of five years from the date of the transfer. The acquirer's liability is not limited; however, the acquirer and the seller may agree on exclusions of liability. Such an agreement is effective in relation to third parties only if it was registered in the commercial register, or published in a commercially customary manner, or notified to the third party on an individual basis.
viii Mass tort actions
Austrian law does not (yet) provide for mass tort actions; however, the Austrian Procedural Code offers instruments that permit the bundling of a series of related claims or proceedings under certain conditions, thus enabling a number of plaintiffs to bring their claim against one defendant. This instrument is in particular a formal joinder of parties, which presupposes that the subject matter of the claims is based on similar factual grounds and jurisdiction of the court is given for each individual claim.
Further, Austrian case law has in the preceding years developed the 'class action of Austrian style' under which, if the claims are first assigned to another person or legal entity, this person (legal entity) may then bring the claims as sole plaintiff in one action provided that the bases of the claims, as well as the questions of fact and law are in principle the same.
In cases of personal injury both under the Product Liability Act and fault-based liability under general civil law, compensation covers medical treatment costs, loss of income and appropriate damages for pain and suffering (which may also include mental damage and suffering owing to the loss of a close relative). In the praxis of courts, as measurement criteria for damages for pain and suffering, certain amounts for days of severe, moderate and mild pain and suffering are applied, and these are usually calculated by a court-appointed medical expert.
As regards damage to property, under the Product Liability Act, there is a deductible amount of €500, and damage to the defective property itself are not covered. Further, under the Product Liability Act pure financial losses are not recoverable.
Austrian law does not allow for punitive or exemplary damages.
For criminal liability, see Section III.
V YEAR IN REVIEW
There have only been a few (published) decisions rendered by Austrian courts in the field of product liability over the past year.
One case concerned a claim against a producer of food packaging, which the plaintiff used to package his lasagne. The defendant supplied the plaintiff with cut-out cartons, which were only coated on one side with plastic (in accordance with the agreement between the parties). The coated side, which is supposed to protect the food as the 'inside' of the carton, was perceptible (visually) to the plaintiff. The plaintiff nevertheless packaged the lasagne on the uncoated 'outside'. Subsequently, it turned out that the lasagne could not be removed from the cardboard without leaving residue. The plaintiff based his claim, inter alia, on product liability for damages suffered as a result of taking back goods from its customers. In its decision, the Supreme Court states that, according to the Product Liability Act, damage to property is only compensable if it was not suffered by an entrepreneur who used the item predominantly in its business. Further, the Supreme Court confirmed that goods intended for resale to third parties are considered as predominantly used in entrepreneurs' businesses.19
1 Eva Spiegel is a partner and Florian Horak is a consultant at Wolf Theiss Rechtsanwälte GmbH & Co KG.
2 Federal Act of 21 January 1988 Governing the Liability for a Defective Product, BGBl. No. 99/1988, as amended.
3 Austrian Supreme Court, Case No. 1 Ob 62/11s of 28 April 2011 and Case No. 9 Ob 59/15i of 28 October 2015.
4 Welser/Rabl, Produkthaftungsgesetz, p. 102f.
5 Austrian Supreme Court, Case No. 7 Ob 49/01h of 30 March 2001 and Case No. 1 Ob 216/11p of 24 November 2011.
6 Austrian Supreme Court, Case No. 6 Ob 215/11b of 13 September 2012.
7 Austrian Supreme Court, Case No. 6 Ob 108/07m of 27 February 2009.
8 Welser/Rabl, Produkthaftungsgesetz, p. 7f.
9 Product Safety Act 2004, BGBl I No. 16/2005, as amended.
10 Report from the Commission of the European Communities (COM (2000) 893 final) on the Application of Directive 85/374 on Liability for Defective Products, 21, 31.
11 Pursuant to Section 4 of the Product Safety Act a product is deemed safe, when, provided that it is put to its proper or any reasonably foreseeable use, it harbours no dangers or dangers of such a low level as is acceptable for human safety with a view to its use and to safeguarding a high level of protection.
12 Fitz/Grau/Reindl, Produkthaftungsgesetz, p. 257.
13 If the defendant is domiciled within the European Union, to proceedings instituted after 10 January 2015 Regulation (EU) No. 1215/2012 of 12 December 2012 on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters (recast) applies, and to proceedings instituted before 10 January 2015, its predecessor, Council Regulation (EC) No. 44/2001 of 22 December 2000 on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters, is applicable.
14 The Lugano Convention on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters applies in relation to Switzerland, Norway and Iceland.
15 Austrian Supreme Court, Case No. 7 Ob 541/92 of 23 April 1992, Case No. 2 Ob 157/04h of 1 July 2004, Case No. 7 OB 173/17t of 20 June 2018 and Case No. 3 Ob 152/19p of 11 September 2019.
16 European Court of Justice, Case C-51/97 (Réunion Européenne); Case C-189/08 (Zuid-Chemie).
17 Austrian Supreme Court, Case No. 7 Ob 187/12v of 28 November 2012 and Case No. 7 Ob 19/14s of 28 November 2012.
18 European Court of Justice, Case C-45/13 (Andreas Kainz).
19 Austrian Supreme Court, Case No. 3 Ob 21/19p of 20 February 2019.